35Mn2, alloy structural steel.
Standard: GB/T 3077-1999
The plasticity is moderate during cold deformation, and the machinability is fair, but the weldability is poor. Compared with 30Mn2 steel, it has higher carbon content, higher strength, wear resistance and hardenability. The critical hardenable diameter in oil reaches 7.5-20mm, but the plasticity is slightly reduced, and there is white spot sensitivity. And the tendency of overheating and tempering brittleness, and the tendency to form cracks during water quenching.
Generally used in quenched and tempered or normalized state, in the manufacture of heavy and medium-sized machinery, it can be used as connecting rods, spindles, half shafts, crankshafts, cold heading bolts and other mechanical parts with high stress requirements; in agricultural machinery, It can be used as wear-resistant parts such as shovel and shovel handle; it can be used instead of 40Cr steel when manufacturing small cross-section (diameter <20mm) parts. [Chemical composition] (mass fraction) (%)
Carbon C: 0.32～0.39
Silicon Si: 0.17～0.37
Manganese Mn: 1.40～1.80
Phosphorus P: “0.025
Sulfur S: “0.025
Chromium Cr: “0.30
Nickel Ni: “0.30
Copper Cu “0.25 [Mechanical properties]
Sample blank size (mm): 25
The first quenching heating temperature (℃): 840; coolant: water
The second quenching heating temperature (℃):-
Tempering heating temperature (℃): 500; Coolant: water
Tensile strength (σb/MPa): ≥�835
yield point (σs/MPa): ≥685
Elongation after breaking (δ5/%): ≥12
Reduction of area (ψ/%): ≥45
Impact absorption work (Aku2/J): ≥55
Brinell hardness (HBS100/3000) (annealed or high temperature tempered state): ≤207
Link to this article：What is 35Mn2 steel? What are the applications of 35Mn2 steel?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki，thanks